DESCRIPTION
Informations de base.
| Numéro de modèle. | DCIP042 |
| Maille de poudre de gypse | 80 mailles-120 mailles |
| Carburant | Gaz naturel/charbon/diesel |
| Type de fabrication | Entièrement automatique |
| Standard | Norme nationale chinoise GB/T9776-2008 |
| Temps de prise initial du gypse | 3min-5min |
| Rythme | Ligne de production de flux |
| Matière première | Roche de gypse naturelle |
| Automatisation | Automatisation |
| Portée de production | Gamme de produits |
| Ligne de production automatique | Assemblée |
| Forfait Transport | Emballage en état de navigabilité |
| spécification | ISO 9001 |
| Marque déposée | DCI |
| Origine | Chine |
| Code SH | 84742090 |
| Capacité de production | 6 ensembles |
Description du produit
Introduction de la ligne de production de poudre de gypse :
| Partie de contrôle | Entièrement automatique/semi-automatique |
| Capacité annuelle | Personnalisé (20 000 à 300 000 tonnes par an) |
| Système de calcination | Four à ébullition |
| Four rotatif |
| Carburant | Gaz naturel, diesel, charbon, fioul lourd |
| Matière première | Roche de gypse naturelle (Contenu de [email protégé] > 80 %). Gypse de désulfurationPhosphogypse |
| Utilisation de la poudre finie | Plaque de plâtre |
|
|
| | | |
|
| | |
|
|
Note: 1Mpa=10.2kgf/cm2Responsibility of Buyer and SellerPrepared by Buyer1.1 Machinery and tools for installation, commission and maintenance1.2 Transportation tool:2 sets of forklifts1.3 Power supply systema. High-voltage power supplyb. Substation and distribution station1.4. Water supply& storage and drainage system1.5 Civil engineering: Building construction, equipment foundation(including pre-burying work), steel-concrete structure silos and pools.1.6 Material used for making machine's platform and supporting frame of equipmentProvided by Buyer2.1 Providing round-trip ticket and other transportation cost for the Seller's workers2.2 Providing accommodation and all kinds of necessary extra charges for the Seller's workers during installation and commissioning and training period2.3 Providing all necessary large tools for installation, such as crane, forklift, welder, acetylene& oxygen cutting machine, etc2.4 Providing assistant workers to cooperate with the Seller's workers during installing according to the Seller's requirement2.5 Usage permission for special equipmentProvided by Seller2.1 Production equipment2.2 Gypsum Board Production Line,Providing installation guiding engineers and technical workers2.3 Providing 1 team leaders and 1 interpreters2.4 Providing equipment foundation drawings, general arrangement drawing of production line (layout plan, elevation drawing and side view drawing) within 40 days after receiving down payment2.5 Providing equipments' operation manual during training2.6 Providing main equipments' general assembly drawing, wiring diagram of control cabinets, PLC computer programs within 7 days after acceptance2.7 The Seller is in charge of commissioning and traininga. Commissioning: the Seller shall send engineers and technical workers to plant site to do full-scale testing, and the Buyer shall also send assistant staff to cooperate with the Seller's people.b. The Seller's workers in charge of commissioning will do performance operation, make on-site speeches and answer questions to Buyer's technicians and operation workers under training. During the whole process of testing, both sides shall work together. After Buyer's workers master operation technique, the Seller will hand over the whole running line to the Buyer's for operation and then the training work is finished.2.8 Within one year after signing the Acceptance Certificate, the Seller shall provide technical consultation to the Buyer for free. If the Seller's people are asked to be on the site, the Buyer shall provide round-way tickets and accommodation abroad.Environmental protection:Main pollution sources:Waste residue: Waste board and board edge cut down, etc.Waste water: The sediment water left after the fan circulation use in the product process, from washing pool and toilet water.Noise: mainly is 95Db(A)or so noise from the fan.Dust: From mixing material and cutting board.Disposal methods:Waste residue and disposal: It does not pollute the environment and can be re-used afterreprocessing in gypsum powder production line.Waste water and disposal: No industrial waste water. The living wastewater is drained into the plant sewage network, and the production wastewater from cleaning floor in the workshops can be recycled after the secondary sedimentation. And the water used in such equipment as fan can also be recycled.Noise and deposition: Noise, which mainly comes from fan. Besides setting soft joints at the exhaust inlet and exhaust outlet. Set impedance complex mufflers at the exhaust outlet, which can low the noise as much as 30Db (A).Dust and disposal: Dust collection devices will be equipped in the production process.Labor sanitationSafety designSafety design for factory areaThe factory road traffic design and outdoor fire hydrant arrangement will be in conformity with every requirement in "Achitectural Design Fire Prevention Norm"; The pavements and driveways are smooth, unblocked, and there are enough lighting facilities at night; Set covers over the draniage ditches in the factory; Make it easy to go through, discharge, convenient and safe; at the same time do virescence in the whole factory to reduce the dust and noises.Safety design for workshopIn the workshop, certain safe distance must be left for the main passages and operating passages, between equipments and the building, between equipment and equipment, and between equipment and passages; Set guard rail on all workbench edges; Set covers over drainage ditches; Lighting is enough in the workshop; All electrical equipments have ground protection, and there is overhauling power of 36V to ensure of overhaul safety.Harmful factor in producing:Variety of harmful substance: Noises from fan, air compressor, etc.Measures to reduce harmful factors: Do best to select low noise equipments to reduce the noise from sound source, and meanwhile add anti-vibration soft connectioner and muffler on the fan.Precautionary measures of safety and sanitationProtective appliances shall be allotted to each worker according to real working conditions; All equipment is managed by certain person, the detailed operational procedure shall be made. Workers on duty must carry on safety education and corresponding skills training; strictly operate according to operation procedure to ensure the person's security and equipment's good condition; Regularly carry on safety education to staff; Regularly organize safety inspecton to dispel the accident potential in time.Explosionproof Explosive materials are not produced and discharged in the production workshop of this project. There is no factor of explosion.Fire fighting system Our equipment is not easy to produce fireworks, so don't need any corresponding fire detection device.
Français
English
Deutsch
Español
Italiano
Português
日本語
한국어
Русский
Maison
